Brenn vorgang bricht ab

Dieses Thema im Forum "Hardware Probleme" wurde erstellt von Dome590, 27.02.2007.

  1. #1 Dome590, 27.02.2007
    Dome590

    Dome590 Neuer Benutzer

    Dabei seit:
    17.01.2007
    Beiträge:
    22
    Zustimmungen:
    0
    so servus^^

    ich hoffe ihr könnt mir helfen es geht um folgendes

    wenn ich mit meinem DVD Brenner brennen will bricht der vorgang bei
    genau 3% ab ich weis nicht woran das liegen könnte
    hir mal der log der nach dem fehlgeschlagenen brenn vorgang kommt

    1C80-0000-19E5-MA2X-4007-0589-****
    1C83-731C-10E5-477X-404C-EXC3-****

    Windows XP 6.0
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 7.7.5.1
    Internal Version: 7, 7, 5, 1

    Recorder: <PIONEER DVD RW DVR-106D>Version: 1.05 - HA 1 TA 0 - 7.7.5.1
    Adapter driver: <IDE> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 1 - 7.7.5.1
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===

    === CDRom-Device-Map ===
    PIONEER DVD RW DVR-106D E: CDRom0
    HL-DT-ST DVD-ROM GDR8163B F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 1022MB (1047488kB)
    Free physical memory: 791MB (810848kB)
    Memory in use : 22 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.2.2007
    ===== Disc-Copy over image - 1st step : Copy to image ...

    01:38:57 #1 SPTI -1066 File SCSIPassThrough.cpp, Line 179
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAC 00 00 00 00 00 00 00 00 32 03 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
    Buffer x07a1a200: Len x328

    01:38:57 #2 SPTI -1066 File SCSIPassThrough.cpp, Line 179
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
    Buffer x07a1a5c0: Len x648

    01:39:03 #3 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    01:39:04 #4 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    01:39:04 #5 Text 0 File DVDCopy.cpp, Line 319
    DVD Track-Information from source disc:
    Media Type: DVD+R
    S01 T01 Con 0x14 Start 0 Len 2056656 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

    01:39:04 #6 Text 0 File DVDCopy.cpp, Line 434
    Max -1 tracks of 1 allowed to copy
    1: 0 - 2056656 = 2056656, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    01:39:04 #7 Text 0 File Burncd.cpp, Line 3465
    Turn on Disc-At-Once, using DVD media

    01:39:04 #8 Text 0 File DlgWaitCD.cpp, Line 306
    Last possible write address on media: 4718591 (1048:34.41, 9215MB)
    Last address to be written: 2056655 (457:02.05, 4016MB)

    01:39:04 #9 Text 0 File DlgWaitCD.cpp, Line 318
    Write in overburning mode: NO (enabled: CD)

    01:39:04 #10 Text 0 File DlgWaitCD.cpp, Line 490
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    01:39:04 #11 Text 0 File ThreadedTransferInterface.cpp, Line 823
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Daten (Mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 2056656 (2056656) = #2056656/457:2.6
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2056656 blocks [Image Recorder]
    --------------------------------------------------------------

    01:39:04 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1026
    Prepare [Image Recorder] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4212031488, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 2056656 | 2056656 | 0x00
    0 | 1 | 1 | 0x41 | 2056656 | 2056656 | 0x00
    2056656 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    01:39:04 #13 Phase 120 File dlgbrnst.cpp, Line 1760
    Creating the image for burning

    01:39:04 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2764
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    01:51:12 #15 Text 0 File WriterStatus.cpp, Line 113
    <Image Recorder> start writing Lead-Out at LBA 2056656 (1F61D0h), length 0 blocks

    01:51:13 #16 Phase 121 File dlgbrnst.cpp, Line 1760
    Creating Image completed successfully

    01:51:20 #17 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    01:51:26 #18 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    01:51:26 #19 Text 0 File Cdrdrv.cpp, Line 10529
    DriveLocker: UnLockVolume completed



    ===== Disc-Copy over image - 2nd step : Burn the image ...

    01:51:29 #1 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    01:51:31 #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
    Image was written as DAO.
    DAOI:
    MediaCatalogNumber = ''
    TocType = 0x40
    Finalized = 1
    First/Last Track = 1 / 1
    1: ISRC = ''
    Blocksize = 2048
    TrackMode = 'TRM_DATA_MODE1'
    TrackConfig = 0x00
    First/Last Index = 0 / 1
    Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4212031488
    CUES:
    MTYP: Mediumtype = DVD (old format) (0x1C)
    Image file name: <D:\Users\Dome590\Documents\TempImage.nrg>

    01:51:31 #3 Text 0 File Burncd.cpp, Line 3465
    Turn on Disc-At-Once, using DVD media

    01:51:32 #4 Text 0 File DlgWaitCD.cpp, Line 306
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2056655 (457:02.05, 4016MB)

    01:51:32 #5 Text 0 File DlgWaitCD.cpp, Line 318
    Write in overburning mode: NO (enabled: CD)

    01:51:32 #6 Text 0 File DlgWaitCD.cpp, Line 2912
    Recorder: PIONEER DVD RW DVR-106D, Media type: DVD+R
    Disc Manufacturer ID: OPTODISC, Media Type ID: OR8, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 3

    01:51:32 #7 Text 0 File DlgWaitCD.cpp, Line 490
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    01:51:32 #8 Text 0 File ThreadedTransferInterface.cpp, Line 823
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - DVD-ROM)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2056656 (2056656) = #2056656/457:2.6
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2056656 blocks [E: PIONEER DVD RW DVR-106D]
    --------------------------------------------------------------

    01:51:32 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1026
    Prepare [E: PIONEER DVD RW DVR-106D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4212031488, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 2056656 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 2056656 | 0 | 0x00
    2056656 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    01:51:32 #10 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    01:51:32 #11 Phase 36 File dlgbrnst.cpp, Line 1760
    Burn process started at 4x (5.540 KB/s)

    01:51:32 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2764
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    01:51:32 #13 Text 0 File Cdrdrv.cpp, Line 9288
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: OPTODISC
    Media type ID: OR8
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 4F 50 54 4F 44 - 49 53 43 4F 52 38 00 38 ...OPTODISCOR8.8
    23 54 37 09 02 64 6A 02 - C8 63 18 18 0A 0A 0E 0E #T7..dj..c......
    01 1B 1D 0B 0B 11 13 01 - 00 00 00 00 00 00 00 00 ................

    01:51:32 #14 SPTI -1066 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
    Buffer x07a50880: Len x648

    01:51:32 #15 Text 0 File DVDPlusRW.cpp, Line 674
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    01:51:42 #16 Text 0 File Cdrdrv.cpp, Line 1303
    01:51:42.948 - E: PIONEER DVD RW DVR-106D : Queue again later

    01:52:03 #17 SPTI -1106 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 0E 00 00 00 00 73 03
    Buffer x093e0640: Len x10000
    0x2E 00 6F E6 1A 00 00 1A E6 6F 44 27 00 00 00 00
    0x27 44 66 0B 15 16 2E 3A 08 00 00 00 01 00 00 01
    0x0C 42 52 49 43 4B 48 32 42 2E 50 4E 47 00 2E 00

    01:52:03 #18 CDR -1106 File Writer.cpp, Line 301
    Power calibration error
    E: PIONEER DVD RW DVR-106D

    01:52:27 #19 SPTI -1106 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 73 03

    01:52:27 #20 Phase 127 File dlgbrnst.cpp, Line 1760
    Generating DVD high compatibility borders

    01:52:52 #21 CDR -1122 File WriterStatus.cpp, Line 162
    Unable to recover TOC
    E: PIONEER DVD RW DVR-106D

    01:52:52 #22 TRANSFER -24 File WriterStatus.cpp, Line 162
    Could not perform end of Disc-at-once

    01:52:52 #23 Phase 38 File dlgbrnst.cpp, Line 1760
    Burn process failed at 4x (5.540 KB/s)

    01:52:53 #24 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    01:52:57 #25 Text 0 File Cdrdrv.cpp, Line 10529
    DriveLocker: UnLockVolume completed

    01:52:57 #26 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

    also ich hoffe mal das geht inordnungd as ich das gepostet hab ^^
    ich kann mit dem log nix anfangen kenn michd anicht so aus hoffe ihr könnt damit was anfangen und mir helfen

    ach und wenn ich eine normale 700mb cd brennen will erkennt er denn rolling erst gar nicht

    soo hoffe ihr könnt mir helfen is echt wichtig
     
  2. AdMan

    schau mal hier: Windows-Wartungs-Tool. Viele Probleme lassen sich damit einfach beheben. Oftmals ist der PC dann auch schneller!
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren.
  3. #2 bul-bul-ogly, 27.02.2007
    bul-bul-ogly

    bul-bul-ogly Erfahrener Benutzer

    Dabei seit:
    05.02.2007
    Beiträge:
    6.383
    Zustimmungen:
    0
    Was versuchst Du denn zu brennen?
     
Thema: Brenn vorgang bricht ab
Besucher kamen mit folgenden Suchen
  1. NeroError(-1066)

    ,
  2. fehler scsi status 1 brennen

    ,
  3. scsistatus(x02) winerror(0)

    ,
  4. neroerror(-1066) (key_illegal_request),
  5. cdrom0: scsistatus(x02) winerror(0) neroerror(-1106),
  6. cdrom1: scsistatus(x02) winerror(0) neroerror(-1066),
  7. dvd rekorder brennen bricht ab,
  8. tempimage.nrg sony,
  9. unlockmcn,
  10. neroerror(-1106) beheben
Die Seite wird geladen...

Brenn vorgang bricht ab - Ähnliche Themen

  1. Wie läuft Rückkehr ins Büro nach längerer Krankheit ab?

    Wie läuft Rückkehr ins Büro nach längerer Krankheit ab?: Meine Nichte war jetzt über 2 Monate krank geschrieben und hat Sorge wieder zurück ins Büro zu müssen. Ihr Chef ist ein Grantelbart, der schon am...
  2. Internet/Netzwerkverbindung bricht zeitweise ab

    Internet/Netzwerkverbindung bricht zeitweise ab: Servus, seit ein paar Tagen treten bei unseren Rechnern sporadisch kurze Verbindungsabbrüche auf, sprich das Internet fällt aus. Dies tritt in...
  3. Minecraft kackt ab sobald ich die Aufnahme starte!

    Minecraft kackt ab sobald ich die Aufnahme starte!: Guten Abend liebe Community. Und zwar habe ich letztens einen neuen PC bekommen. Allerdings macht der PC etwas auf blöd. Sobald ich Minecraft...
  4. Bildschirm schaltet sich wärend dem Spielen ab..

    Bildschirm schaltet sich wärend dem Spielen ab..: Guten Morgen ins Forum, Seit gestern scheint meine Graka nicht mehr richtig zu funktionieren... Der PC an sich läuft beim surfen im Internet...
  5. Computer stürzt willkürlich ab, bzw. startet neu

    Computer stürzt willkürlich ab, bzw. startet neu: Hallo zusammen, Ich bin neu hier im Forum und möchte nun endlich nach langem Versuchen ein paar Meinungen zu meinem Problem einholen. Vor ca. gut...